February 18, 2004

February 18, 2004    Gray skies, sleet, snow flurries, and rain. It must be February! Below, Cherokee’s deck is slick and wet, with “leaves” of teak shavings blown in the corner. Bryan and Chris have completed the decking and border. They are now trimming out the covering boards with an additional 1 5/8 inch of teak glued beneath the 7/8 inch thick covering boards to give a 2.5 inch reveal around the entire cockpit. Isn’t it funny how we stubborn Americans still measure according to inches instead of centimeters?

Brrrrrrr...

Completed Teak Cockpit


Details... details!

Cockpit Decking, Starboard and Port View

Above, details of the cockpit decking are shown. Pictured left is the decking near the starboard hawsehole/scupper and cleat. On the right is the area by the transom door, port hawsehole, and rear engine hatch.

Hey, the son's out!

Howard and Leland Preparing Windows

It’s a family affair these days with the Blakeworks crew – the new painters are father/son team Leland and Howard Day. When they aren’t painting they work as party boat captains and commercial fishermen. Above Howard is preparing the galley windows for painting. Howard and Leland are also shown below preparing the galley area. To the right in the pilot house is our other family team, Caroline Brice, her mother Margaret Willis, and mother-in-law Sharon Hunt. What do these women have in common besides kin? They’re all hard workers and love Arabian horses that they raise, train, and ride like the wind!

Anything you can do... We can do better...

Family Teams Sanding, Painting, and Varnishing


I'd rather be riding...

Caroline Sanding between Helm and Electrical Panel

Leonard is gluing together the flybridge console which will house the upper station controls, and fiberglassing it. It will soon be installed high on the flybridge, and work on the aluminum halftower will begin.

Cool Batmobile! Who keeps writing graffiti on my stuff?

Leonard Building Flybridge Console

 

Inconsolable console in fetal position

Console with Lloyd and CBCII in Background

So what’s the story behind the CBCII that Lloyd is working on? The CBCII was originally called Miss Ruth, and was built in 1956 by Carlie Willis of Davis, NC. Her hull is made of juniper planking over sawn frames, and she only draws 2.8 feet. Desiged to ferry vehicles out to Core Banks, Miss Ruth ran a little over 33 feet long, but was lengthened in 1983 to 36.5 feet. She was also widened from 9.2 to 12.8 feet across! The Core Banks Club bought and renamed Miss Ruth to the CBCII in 1987, using her as a workboat to haul vehicles, fuel, and supplies to their clubhouse. When the Club’s lease with the National Park Service expired in ’99, she was deployed to lug the club’s possessions off Cape Lookout. What does the future hold for this faithful workhorse? New owners Lee McAllister and John Hagan explain that Lloyd will “convert her to a large houseboat that we will use as a mother ship when we are hunting in Core Sound and fishing at the hook.” The CBCII will once again be called the Miss Ruth, and be fitted with a V-berth and stateroom for four. So like the Cherokee, she will cruise bravely into the 21st Century as a spiffier version of her former self. Signing off for now, Barbara “Fish Doctor” Blake

CBCII goes in for Beauty Makeover